Horizontalna mašina za rezanje furnira za drvo vertikalna za rezanje furnira mašina za rezanje furnira linija za proizvodnju šperploče
Veneer slicer is mainly for slicing solid wood, engineer wood and other composite board, working efficiency is high, and veneer thickness is uniform. It is widely adopt in decorative veneer of plywood, furniture, flooring, construction industry and so on.
Opis
Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine plywood production line
Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine linija za proizvodnju šperploče,horizontal wood slicing 4*8 engineer wood block veneer slicer machine
1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.
2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber.
3 Whole casted beam holds the log strongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure
4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault.
5 Special designed big size driving gear runs smoothly with a low noise when it runs high speed.
wood slicing vertical veneer slicer machine,veneer slicer machine plywood production line,veneer slicer machine,engineering wood block veneer gurjan veneer slicer,wood veneer slicer machine,woodworking machines veneer slicer.
SPECIFICATIONS FOR HORIZONTAL VENEER SLICER | |||
Model | BB1131 | BB1226 | BB1142 |
Max cutting size | 2600x700x680mm | 2600x1300x950mm | 4200x1300x950mm |
Veličina sečiva | 3500x200x24mm | 3500x200x24mm | 4500x2000x24mm |
Debljina furnira | 0.1-2.2mm | 0.1-2.2mm | 0.1-2.2mm |
Brzina sečenja | 0-36pcs / min | 0-36pcs / min | 0-36pcs / min |
Wood clamping unit | 10kom | 10 jedinice | 10kom |
Clamping methods | hidraulički | hidraulički | hidraulički |
Ukupna tezina | 22Tona | 24Tona | 32Tona |
Ukupna veličina | 8030x4530x2530mm | 9530x5670x2470mm | 9550x5950x2990mm |
Fotografije u tvornici korisnika
Mašinski delovi
Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.
Double V-chutes
pokretna traka
Servo motor
glavne karakteristike
Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber
UPIT
Povezani proizvoda
-
Sušač furnira sa jezgrom od šperploče Valjak za sušenje furnira za kontinualnu sušaru za proizvodnju šperploče
-
Industrijska mrežasta traka za sušenje furnira velikog kapaciteta rotirajuća bukva Kontinuirana mreža za sušenje furnira
-
Mašina za sastavljanje furnira sa jezgrom od šperploče horizontalnog tipa
-
600T/800T višeslojna hidraulična mašina za vruće prešanje furnira za teške uslove rada automatska mašina za prešanje drveta
-
Potpuno automatska pila za obrezivanje iverice za obradu drveta
-
Mašina za ljuštenje furnira nož
-
Hidraulična giljotina mašina za rezanje furnira Mašina za obradu drveta
-
Puna fabrika šperploče 3d
-
Visokoefikasna mašina za šperploču mašina za rezanje trupaca mašina za izradu šperploče
-
Sušač za furnir šperploče velikog kapaciteta Valjak za sušenje šperploče za kontinuirano sušenje